Part P Practice Test

Part P Study Tips

• Create a structured study schedule at least 4-6 weeks before your Part P exam date.
• Focus on understanding core concepts rather than memorising answers for the Part P Building Regulations Electrical Certification.
• Use our free practice tests to identify weak areas and track your progress over time.
• Review the official Part P exam syllabus to ensure complete topic coverage.
• Take timed practice sessions to build your exam pace and reduce test-day anxiety.

Ready to Pass the Part P?

Join thousands of candidates who have used our free practice tests to prepare for the Part P Building Regulations Electrical Certification. Start practising today and build the confidence you need to succeed.

For more in-depth preparation strategies, read our DMV - Department of Motor Vehicles — covering exam format, scoring, and proven study techniques.

Sample Part P Electrical Practice Questions

Try these questions from our free Part P Electrical practice tests. The correct answer and an explanation follow each question.

1. According to BS 7671 Section 701, what is the extent of Zone 1 in a bathroom with a bath?

   • A. The area directly above the bath tub to a height of 2.25m from the floor
   • B. The area within 0.6m horizontally from the edge of the bath
   • C. The entire bathroom
   • D. Only the area directly underneath the bath

Answer: A. The area directly above the bath tub to a height of 2.25m from the floor

Zone 1 in a bathroom with a bath is the area directly above the bath (or shower basin) up to a height of 2.25m from the finished floor level (or to the top of the ceiling if lower). If there is no fixed bath screen, the zone extends 1.2m horizontally from the fixed water outlet. Equipment in Zone 1 must be at least IPX4 rated and only certain items are permitted.

Answer: C. Grey

Standard UK twin and earth cable has a grey PVC outer sheath, making it readily identifiable as fixed wiring cable in a domestic installation.

Answer: B. 0.4 seconds

Regulation 411.3.2.2 of BS 7671 requires that for TN systems, final circuits not exceeding 32A must have a maximum disconnection time of 0.4 seconds for a 230V supply. This ensures rapid disconnection in the event of a fault, limiting the duration of electric shock to a survivable level.

Answer: B. To ensure only the protective device closest to the fault operates, leaving other circuits unaffected

Discrimination ensures that during a fault, only the device nearest to the fault trips, while upstream devices remain closed. In a domestic consumer unit, this means a fault on one circuit should trip only that circuit's MCB, not the main switch or RCD protecting other circuits. This is achieved through appropriate device selection and time-current coordination.

Take the full Part P Electrical practice test