EPA Worker Health, Safety & PPE 2

Question 1

Which respirator protection factor is appropriate for most lead renovation and abatement tasks with moderate dust generation?

Accepted Answer

APF-50 (half-face elastomeric with P100 filters)

Answer

APF-10 (N95 disposable)

Answer

APF-1000 (supplied-air respirator)

Answer

APF-5 (dust mask)

Question 2

Before using a tight-fitting respirator on a lead abatement job, what must the worker perform?

Accepted Answer

Fit test

Answer

Blood lead level test

Answer

Lung capacity test

Answer

Air quality measurement

Question 3

What should workers do immediately before eating, drinking, or smoking when working in a lead-contaminated area?

Accepted Answer

Wash hands and face thoroughly

Answer

Apply sunscreen

Answer

Change respirator filters

Answer

Notify the supervisor

Question 4

What type of protective clothing is required during lead abatement activities?

Accepted Answer

Disposable coveralls (Tyvek or equivalent) over personal clothing

Answer

Standard cotton work clothing

Answer

Leather apron only

Answer

Fire-resistant clothing

Question 5

Why is it prohibited to dry sweep lead-contaminated areas during or after abatement?

Accepted Answer

Dry sweeping resuspends lead dust into the air, increasing inhalation exposure

Answer

It damages flooring surfaces

Answer

It violates OSHA electrical safety rules

Answer

It spreads chemical stripping agents

Question 6

Under the EPA RRP Rule, which activity requires contractors to use lead-safe work practices to protect themselves and occupants?

Accepted Answer

Disturbing more than 6 sq ft of lead paint indoors per room

Answer

Painting over intact lead paint

Answer

Inspecting surfaces for lead without disturbing them

Answer

Installing new fixtures in non-painted areas