โ† All EPA Flashcard Decks

Waste Disposal & Environmental Compliance Flashcards

7 cards from real EPA practice questions. Tap to flip, then mark Knew It or Still Learning โ€” missed cards come back until you master them.

Read the first 7 Waste Disposal & Environmental Compliance flashcards as text
  1. What is the maximum on-site accumulation time allowed for a Small Quantity Generator (SQG) of lead hazardous waste before shipment to a disposal facility?

    Answer: 270 days

    Under RCRA, Small Quantity Generators may accumulate hazardous waste on-site for up to 270 days before it must be shipped to a permitted treatment, storage, or disposal facility.

  2. Disposable lead-contaminated PPE such as coveralls and gloves from an abatement project must be handled by:

    Answer: Sealing in labeled containers for characterization and disposal per waste testing results

    Contaminated disposable PPE must be sealed in labeled containers and disposed of according to waste characterization results, and managed as hazardous waste if TCLP testing so indicates.

  3. Who is authorized under RCRA to transport lead hazardous waste from an abatement site to a disposal facility?

    Answer: An EPA-registered hazardous waste transporter complying with DOT regulations

    RCRA requires that hazardous waste be transported only by EPA-registered transporters who also comply with DOT Hazardous Materials Transportation Act requirements.

  4. Lead-contaminated water generated during wet scraping or wet sanding in lead abatement must be:

    Answer: Collected and disposed of in compliance with Clean Water Act and local pretreatment standards

    Lead-contaminated water must be collected, characterized, and disposed of in accordance with Clean Water Act requirements and local publicly owned treatment works (POTW) pretreatment standards.

  5. Waste characterization testing in lead abatement projects is performed primarily to:

    Answer: Determine whether waste exceeds the TCLP threshold and requires hazardous waste management

    Waste characterization via TCLP testing determines whether lead-containing debris exceeds the 5 mg/L threshold, triggering RCRA hazardous waste management requirements.

  6. Which agency, in addition to EPA, has regulatory jurisdiction over the transportation of lead hazardous waste on public roads?

    Answer: DOT (Department of Transportation)

    The U.S. Department of Transportation regulates the safe transportation of hazardous materials, including lead waste, under the Hazardous Materials Transportation Act.

  7. Under EPA's Renovation, Repair, and Painting (RRP) Rule, renovation waste containing lead paint must be:

    Answer: Contained and disposed of per applicable federal, state, and local waste disposal requirements

    EPA's RRP Rule requires that lead-containing renovation waste be properly contained and disposed of in compliance with all applicable waste disposal regulations.