Practice Test Geeks(SMSTS) Site Management Safety Training Scheme Practice Test
← All SMSTS Flashcard Decks

Equipment and Tools Knowledge Flashcards

7 cards from real SMSTS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Equipment and Tools Knowledge flashcards as text

  1. Under PUWER 1998, how frequently must work equipment be formally inspected when used in construction environments with high levels of use and wear?

    Answer: At intervals determined by risk assessment and manufacturer guidance

    PUWER requires inspection frequency to be determined by risk assessment and manufacturer recommendations, not a fixed universal interval.

  2. A mobile elevated work platform (MEWP) is being used near overhead power lines. What is the primary hazard to control?

    Answer: Electrocution from contact or flashover

    MEWPs near overhead lines carry a severe electrocution risk because electricity can arc before physical contact occurs.

  3. Which document must accompany a lifting accessory such as a chain sling when it first enters service on a UK construction site?

    Answer: Declaration of conformity and test certificate

    Lifting accessories must have a declaration of conformity and a test certificate demonstrating they meet the required safe working load.

  4. When setting up a tower scaffold, at what height-to-base ratio should stabilizers or outriggers typically be deployed for outdoor use?

    Answer: When height exceeds 3× the minimum base dimension

    PASMA guidance indicates stabilizers are required outdoors when the height exceeds 3 times the minimum base dimension.

  5. A site manager notices a power tool's double-insulation symbol (two concentric squares) is damaged and the outer casing is cracked. What action is required?

    Answer: Tag it out of service and remove it from site

    A damaged casing on a double-insulated tool compromises the second layer of protection; the tool must be taken out of service immediately.

  6. Which of the following is a legal requirement under the Lifting Operations and Lifting Equipment Regulations (LOLER) 1998 for crane lifts?

    Answer: Lifting operations must be properly planned, supervised, and carried out safely

    LOLER Regulation 8 requires every lifting operation to be properly planned by a competent person, appropriately supervised, and carried out safely.

  7. What is the main purpose of a pre-use check on construction plant and equipment?

    Answer: To identify defects before they cause injury or damage

    Pre-use checks detect faults before operation begins, preventing incidents caused by known defects.