Practice Test Geeks(SBCA) Satellite Broadcasting and Communications Association Certification Practice Test
← All SBCA Flashcard Decks

Network Design Flashcards

7 cards from real SBCA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Network Design flashcards as text

  1. In a VSAT star topology network, what is the primary role of the hub station?

    Answer: To aggregate all remote site traffic and connect to the terrestrial network

    In a star topology VSAT network, the hub station aggregates all inbound traffic from remote sites and connects the network to terrestrial infrastructure such as the internet or private WAN.

  2. What is the key advantage of a mesh topology satellite network over a star topology?

    Answer: Lower latency for site-to-site communications

    Mesh topology allows direct site-to-site links, eliminating the double-hop latency (approximately 500ms round-trip) required when all traffic must pass through a central hub.

  3. Which modulation scheme provides the highest spectral efficiency in modern satellite broadband networks?

    Answer: 16APSK

    16APSK offers the highest spectral efficiency among the listed options, delivering approximately 4 bits per symbol, though it requires higher Eb/N0 and is used on high-quality links with sufficient CNR.

  4. A satellite network designer must plan for rain fade on a Ku-band link. Which design technique directly compensates for rain attenuation?

    Answer: Adaptive coding and modulation (ACM)

    ACM dynamically adjusts the modulation and coding rate based on real-time link conditions, reducing throughput during rain fade to maintain link availability.

  5. What does the term 'figure of merit' (G/T) represent in satellite terminal design?

    Answer: The ratio of antenna gain to system noise temperature

    G/T (Gain-to-noise Temperature ratio) is the figure of merit for a receive system, expressing antenna gain relative to system noise temperature in dB/K.

  6. In satellite network capacity planning, what does 'overbooking ratio' refer to?

    Answer: The ratio of total subscribed bandwidth to available satellite capacity

    Overbooking ratio is the ratio of total subscribed (sold) bandwidth to available satellite capacity, exploiting the fact that not all subscribers transmit simultaneously.

  7. Which satellite frequency band is most susceptible to rain fade and therefore requires the largest link margin in network design?

    Answer: Ka-band (26-40 GHz)

    Ka-band experiences the highest rain attenuation due to its shorter wavelength, requiring significantly larger link margins (often 10 dB or more) compared to lower frequency bands.