Safety Trained Supervisor Cheat Sheet 2026

The 30 highest-yield Safety Trained Supervisor facts, distilled from real exam questions. Print it, save it as a PDF, or study it here — free, no sign-up.

1. During a routine workplace inspection, a supervisor identifies an unguarded rotating shaft on a piece of machinery. This represents which category of hazard? → Safety Hazard
2. Which OSHA recordkeeping form is used to record the details of each work-related injury or illness? → OSHA 301 Incident Report
3. Which hard hat class provides protection against high-voltage electrical hazards up to 20,000 volts? → Class B
4. What minimum anchorage strength is required for a fall arrest system? → 5,000 pounds
5. Which of the following activities would MOST likely be governed by a company's 'Life Critical' safety standards? → Performing excavation work in a 6-foot deep trench.
6. How should controls be validated after implementation? → Through monitoring, measurement, testing, and periodic review
7. Which of the following is considered the MOST effective type of hazard control measure according to the hierarchy of controls? → Physically removing the source of the hazard.
8. According to the hierarchy of controls, which of the following is considered the MOST effective method for controlling a hazard? → Elimination
9. Which of the following is NOT a required component of OSHA PPE training? → The financial cost of replacing lost or damaged PPE
10. Ergonomic hazards in the workplace primarily lead to which category of work-related disorders? → Musculoskeletal disorders (MSDs)
11. What is the 5 Whys technique? → Repeatedly asking why to drill from immediate cause to root cause
12. What is the difference between TLV and PEL? → TLVs are ACGIH recommended guidelines while PELs are legally enforceable OSHA limits
13. What should be the FIRST action when an incident occurs? → Ensure safety of all personnel, provide first aid, and secure the scene
14. What is the primary goal of a safety incident investigation? → To identify root causes so that corrective actions can prevent recurrence
15. Under OSHA regulations, who is primarily responsible for paying for required PPE? → The employer
16. What is the primary purpose of a safety observation program? → To identify unsafe behaviors and conditions before they cause injury
17. What is a risk assessment matrix used for? → Evaluating and prioritizing hazards based on likelihood and severity
18. Why is energy isolation (lockout/tagout) life critical? → Unexpected energy release during maintenance can cause immediate death
19. Which method of hazard control is considered MOST effective according to the hierarchy of controls? → Elimination of the hazard
20. A newly hired employee is most at risk for a workplace injury during which period? → During the first year of employment
21. During the construction period, hazards can occur at any time. → True
22. Under OSHA's fall protection standard for general industry, fall protection is required when working at or above: → 4 feet
23. What is the correct procedure for cleaning and disinfecting PPE that is shared among multiple workers? → Follow manufacturer cleaning instructions using compatible disinfectants
24. Which of the following is a mandatory component of an OSHA-compliant Emergency Action Plan (EAP)? → Procedures for employees who remain to perform critical operations before evacuating.
25. The primary purpose of a Safety and Health Program (SHP) is to: → Systematically prevent injuries, illnesses, and fatalities
26. What are the three fundamental components that form the basis of a standard Job Safety Analysis document? → Task Steps, Potential Hazards, Control Measures
27. Which inspection technique follows a product or process from beginning to end? → Process flow analysis
28. The Bloodborne Pathogens Exposure Control Plan must be reviewed at minimum: → Annually
29. Which hierarchy of controls level is considered MOST effective? → Elimination of the hazard
30. During a safety inspection, a supervisor finds a blocked emergency exit. According to OSHA standards, this is: → A serious violation requiring immediate correction