Practice Test Geeks(SAF) Safety Assessment Federation Certification Practice Test
← All SAF Flashcard Decks

Personal Protective Equipment Flashcards

7 cards from real SAF practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Personal Protective Equipment flashcards as text

  1. Which OSHA standard specifically governs Personal Protective Equipment in general industry?

    Answer: 29 CFR 1910.132

    29 CFR 1910.132 is the OSHA general industry standard that establishes the general requirements for PPE selection, use, and maintenance.

  2. When must an employer provide PPE to employees at no cost?

    Answer: When required by OSHA standards to protect from workplace hazards

    OSHA requires employers to provide PPE at no cost to employees when it is necessary to protect them from workplace hazards, with limited exceptions for everyday clothing.

  3. What type of glove is BEST suited for handling strong acids?

    Answer: Neoprene or butyl rubber gloves

    Neoprene and butyl rubber gloves provide superior resistance to strong acids and corrosive chemicals compared to natural rubber or fabric gloves.

  4. A worker is exposed to flying particles during grinding operations. Which eye protection is MOST appropriate?

    Answer: Indirect-vent impact goggles or face shield over safety glasses

    Indirect-vent impact goggles or a full face shield worn over safety glasses provide the best protection against flying particles from grinding.

  5. What is the primary purpose of a hazard assessment before selecting PPE?

    Answer: To identify workplace hazards and evaluate the need for PPE

    A hazard assessment identifies the types and severity of hazards present so that appropriate PPE can be selected to adequately protect workers.

  6. Class E hard hats are designed to protect against which hazard in addition to impact?

    Answer: High-voltage electrical conductors up to 20,000 volts

    Class E (Electrical) hard hats are tested to reduce electrical shock from contact with conductors up to 20,000 volts.

  7. Which fit-testing method is considered the gold standard for tight-fitting respirators?

    Answer: Quantitative fit test using a calibrated instrument

    Quantitative fit testing uses a calibrated instrument to measure actual leakage, providing an objective fit factor rather than relying on the wearer's sensory response.