Range Standard Operating Procedures Flashcards
7 cards from real RSO practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Range Standard Operating Procedures flashcards as text
During a cease-fire command, a shooter continues firing. What is the RSO's immediate priority?
Answer: Physically stop the shooter and secure the firearm if necessary
When verbal commands fail during a cease-fire, the RSO must physically intervene to stop firing and secure the firearm to prevent injury.
What is the standard protocol for handling a 'squib load' (a round with insufficient powder charge) on a live range?
Answer: Call an immediate cease-fire and keep the firearm pointed downrange while an RSO assists
A squib load requires an immediate cease-fire; the firearm stays pointed downrange while an RSO assists, because firing again could cause a catastrophic barrel obstruction.
Which SOP element defines the maximum number of shooters permitted on the firing line at one time?
Answer: Capacity and lane assignment policy
Capacity and lane assignment policies set the maximum number of simultaneous shooters to ensure safe spacing and RSO oversight.
A range SOP requires eye and ear protection. A shooter removes their ear protection briefly to hear instructions. How should the RSO respond?
Answer: Require the shooter to keep hearing protection on at all times while on the range
SOPs require hearing protection at all times on the range because an unexpected discharge can occur even during a cold range.
When should the RSO conduct a pre-session range inspection according to standard SOPs?
Answer: Before shooters are permitted on the firing line
Pre-session range inspections identify hazards such as debris, equipment failures, or target damage before any shooters access the line.
A range SOP specifies a minimum distance between shooting lanes. What is the primary safety purpose of this requirement?
Answer: To prevent muzzle blast and brass ejection from injuring adjacent shooters
Lane spacing prevents muzzle blast, ejected brass, and inadvertent muzzle sweep from creating hazards for shooters in adjacent lanes.
According to standard range SOPs, who has the authority to declare the range 'hot' after a cease-fire?
Answer: The RSO or designee only after confirming the target area is clear
Only the RSO or their designee may declare the range hot after personally verifying that all personnel are off the target area and behind the firing line.