Floor Covering Installation Flashcards
6 cards from real Other Skilled Trades practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Floor Covering Installation flashcards as text
What is the most common subfloor material in residential construction?
Answer: OSB or plywood
OSB (oriented strand board) or plywood are the most common subfloor materials in residential construction due to their strength and cost-effectiveness.
What is the proper method for testing moisture in a concrete subfloor before flooring installation?
Answer: Moisture meter or calcium chloride test
A moisture meter and calcium chloride test are used to measure moisture levels in concrete subfloors to determine if conditions are acceptable for flooring.
What is the required disposal method for old resilient flooring that may contain asbestos?
Answer: Hazardous waste disposal per EPA regulations
Resilient flooring suspected of containing asbestos must be disposed of as hazardous waste following EPA and applicable local regulations.
What grout joint width is considered standard for most floor tile installations?
Answer: 1/8 inch
A 1/8 inch grout joint is the standard for most floor tile installations, though it varies based on tile type and manufacturer recommendations.
Why must carpet seams have at least a 1/8 inch overlap?
Answer: To prevent gaps from appearing after seaming
A minimum 1/8 inch overlap at carpet seams prevents visible gaps from opening after the seam tape adhesive sets and the carpet relaxes.
What does OSHA 29 CFR 1926.95 require for floor covering installers?
Answer: Personal protective equipment appropriate to the task
OSHA 29 CFR 1926.95 covers personal protective equipment requirements, including appropriate knee protection for floor covering installers.