Practice Test GeeksNSC Practice Test
← All NSC Flashcard Decks

NSC Fire Safety Flashcards

6 cards from real NSC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 NSC Fire Safety flashcards as text

  1. What class of fire extinguisher is rated for use on ordinary combustibles such as wood, paper, and cloth?

    Answer: Class A

    Class A extinguishers are designed for ordinary combustibles like wood, paper, and cloth.

  2. Which fire extinguisher class is specifically intended for flammable liquids and gases?

    Answer: Class B

    Class B extinguishers are rated for flammable liquids such as gasoline, oil, and grease fires.

  3. What does the acronym PASS stand for when using a fire extinguisher?

    Answer: Pull, Aim, Squeeze, Sweep

    PASS stands for Pull the pin, Aim at the base, Squeeze the handle, and Sweep side to side.

  4. According to NSC guidelines, at what point should an employee attempt to fight a fire rather than evacuate?

    Answer: Only when the fire is small, contained, and the exit is clear behind them

    NSC recommends fighting a fire only if it is small and contained and your escape route remains clear behind you.

  5. Which federal regulation requires employers to establish an Emergency Action Plan that includes fire evacuation procedures?

    Answer: OSHA 29 CFR 1910.38

    OSHA 29 CFR 1910.38 requires employers to develop and implement an Emergency Action Plan covering fire evacuation.

  6. What is the minimum clearance that must be maintained in front of fire extinguisher locations and electrical panels to ensure access during an emergency?

    Answer: 36 inches

    OSHA and NFPA standards require a minimum 36-inch clearance in front of fire extinguishers and electrical panels.