NCCCO OSHA Crane Regulations 29 CFR 1926 2

Question 1

Under OSHA 29 CFR 1926.1427, crane operators on construction sites must be qualified or certified by what means?

Accepted Answer

Certification by an accredited testing organization, qualification by an audited employer program, qualification by the U.S. military, or a qualifying state or local licensing program

Answer

State licensing only

Answer

Only by passing an OSHA-administered test

Answer

By completing at least 3 years of crane operation experience

Question 2

What does OSHA 29 CFR 1926.1408 specify regarding the minimum safe distance from energized power lines during crane operations?

Accepted Answer

Minimum distances depend on line voltage: 10 feet for lines up to 50 kV, with additional distance for higher voltages, unless the utility owner de-energizes or installs insulating guards

Answer

Cranes must maintain at least 10 feet from all power lines regardless of voltage

Answer

All power lines must be de-energized before any crane work within 100 feet

Answer

Only the line owner's verbal approval is needed to work within 10 feet

Question 3

Under OSHA 29 CFR 1926.1402, who is responsible for ensuring the ground conditions are adequate for crane setup?

Accepted Answer

The employer, with a qualified person assessing ground conditions, and the controlling entity providing ground condition information to the crane employer

Answer

Only the crane owner bears responsibility

Answer

Only the site's structural engineer

Answer

The crane operator alone

Question 4

What does OSHA 29 CFR 1926.1413 require regarding wire rope inspections?

Accepted Answer

A visual inspection of all running and standing wire ropes must be performed before each shift, with more thorough monthly inspections by a qualified person

Answer

Wire rope only needs inspection during the annual crane inspection

Answer

Wire rope must be replaced every 6 months regardless of condition

Answer

Only the hoist rope needs inspection; pendant and gantry lines are exempt

Question 5

Under OSHA 29 CFR 1926.1430, what training is required for crane operators beyond basic certification?

Accepted Answer

Operators must receive site-specific training and familiarization for each crane model and site conditions before operating on a new site or with unfamiliar equipment

Answer

No additional training is required once an operator is certified by an accredited body

Answer

Annual retraining in rigging only

Answer

Additional training is only required after an accident

Question 6

What does OSHA 29 CFR 1926.1424 require when a crane must travel with a suspended load?

Accepted Answer

Travel is permitted only if the manufacturer approves it, the load is kept close to the ground, a qualified person supervises, and specific conditions are met including boom position and travel surface assessment

Answer

Travel with a suspended load is strictly prohibited under all circumstances

Answer

Travel with a suspended load requires only that the operator move slowly

Answer

Any travel is permitted provided no workers are within 50 feet