Hydraulic Systems for Mobile Cranes Flashcards
6 cards from real NCCCO practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Hydraulic Systems for Mobile Cranes flashcards as text
What is the primary function of a load-holding (counterbalance) valve in a crane's hydraulic circuit?
Answer: It prevents a suspended load from descending if a hose or fitting fails
A load-holding (counterbalance) valve is installed at the cylinder port closest to the load and prevents the load from descending due to gravity if a hydraulic hose ruptures or a fitting fails. It only opens to allow lowering when pilot pressure from the directional control valve signals a commanded descent.
What is the function of a pressure relief valve in a mobile crane's hydraulic system?
Answer: It limits maximum system pressure to protect hoses, cylinders, and the pump from overload
A pressure relief valve is set to open and divert flow back to the reservoir when system pressure exceeds a preset maximum. This protects hoses, seals, cylinders, and the pump from pressure spikes that would otherwise cause rupture or seal failure.
During operation, what is the most reliable indicator that a mobile crane's hydraulic system is overheating?
Answer: A high-temperature warning on the instrument panel and fluid with a burnt smell
Overheating hydraulic fluid triggers a temperature warning light or gauge and produces a distinctive burnt odor. Overheated fluid loses viscosity rapidly, accelerating seal and pump wear. Operations must be stopped and the system allowed to cool before continuing.
Why must all hydraulic pressure be relieved before performing maintenance on a crane's hydraulic circuit?
Answer: Stored pressure can cause components to move unexpectedly or fluid to inject through skin at lethal pressure
Hydraulic systems operate at 2,000–5,000 psi or more. Residual pressure can cause cylinders to stroke suddenly if a fitting is loosened, and hydraulic injection injuries — where high-pressure fluid penetrates skin — are life-threatening medical emergencies requiring immediate surgery. Lockout/tagout and full pressure relief are mandatory before any disconnection.
A telescoping crane's boom extends progressively slower with no change in engine RPM. What is the most likely cause?
Answer: Internal leakage across worn cylinder seals or a worn directional control valve spool
When extension speed decreases without an engine RPM change, the pump is producing adequate flow but that flow is bypassing across worn internal seals in the cylinder or across the directional control valve spool. External leaks produce visible fluid loss; internal leakage produces speed loss with no external evidence.
During a pre-operation inspection, the hydraulic fluid level is found to be below the minimum mark. What is the correct action?
Answer: Identify and repair the source of fluid loss, then add only the manufacturer-specified fluid type before operating
Low hydraulic fluid indicates a leak somewhere in the system. Operating with a leak risks running the pump dry (cavitation and pump destruction) and environmental contamination. The leak must be found and repaired first. Only the manufacturer-specified fluid type must be added — mixing incompatible fluids degrades seals and additive packages.