← All NABCEP Flashcard Decks

NABCEP Solar Heating Installation Professional Flashcards

6 cards from real NABCEP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 NABCEP Solar Heating Installation Professional flashcards as text
  1. What is the Solar Fraction (SF) of a solar thermal system?

    Answer: The percentage of the total heating load supplied by solar energy

    Solar fraction represents the portion of a building's total water or space heating load that is met by the solar thermal system, with higher values indicating greater solar contribution.

  2. Which SRCC (Solar Rating and Certification Corporation) rating is used to compare solar water heating collectors?

    Answer: OG-100 Collector Rating

    SRCC OG-100 is the collector-level rating that measures thermal performance under standardized conditions, allowing consumers and installers to compare different collector models.

  3. In a drainback solar thermal system, what prevents freeze damage when the pump shuts off?

    Answer: The water drains back into an indoor reservoir by gravity when the pump stops

    Drainback systems are designed so that water flows only when the pump is running; when the pump stops, gravity returns all water to an indoor reservoir, leaving no water in the collectors to freeze.

  4. What is the recommended storage volume per unit collector area for a solar domestic water heating system?

    Answer: 1.5–2 gallons per square foot of collector

    Industry guidelines recommend 1.5–2 gallons of storage per square foot of collector area to ensure adequate thermal mass without oversizing the tank to the point of poor solar fraction.

  5. What type of heat exchanger is most commonly used in pressurized closed-loop solar thermal systems to protect potable water?

    Answer: Double-wall heat exchanger for separation of glycol from potable water

    Many plumbing codes require a double-wall heat exchanger when toxic antifreeze (or any non-potable fluid) transfers heat to a potable water supply, preventing contamination in case of failure.

  6. What sizing tool does SRCC and the solar industry use to estimate annual solar water heating system performance by location?

    Answer: F-Chart method or Solar Rating and Certification Corporation OG-300 simulation

    The F-Chart method is the industry standard analytical tool for estimating the annual solar fraction and performance of solar water heating systems using local climate data.