Regulatory Compliance & Legal Framework Flashcards
7 cards from real MEOC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Regulatory Compliance & Legal Framework flashcards as text
Which color in the APWA Uniform Color Code identifies proposed excavation or survey marks made by the operator?
Answer: White
White marks indicate proposed excavation routes or areas that the excavating party has staked out before digging.
OSHA requires a 'competent person' to classify soil before excavation work begins. What is the minimum classification that permits workers to enter an unshored trench up to 20 feet deep?
Answer: No soil type permits unshored entry deeper than 4 feet
OSHA 1926.652 requires protective systems (shoring, sloping, or trench boxes) for any excavation 5 feet or deeper; no classification exempts entry from protective requirements.
Under EPA's RCRA regulations, soil excavated from a site contaminated with listed hazardous waste is typically classified as:
Answer: Hazardous waste subject to disposal regulations
Excavated soil from RCRA-listed hazardous waste sites is generally classified as hazardous waste and must be managed, transported, and disposed of per RCRA requirements.
A mini excavator is being used to lift and place a concrete pipe using an attached lifting hook. Which additional regulatory standard applies beyond normal excavator operation?
Answer: OSHA 1926 Subpart CC crane and derrick standards apply to any lifting operations
When an excavator is configured as a crane or used for material lifting, OSHA 1926 Subpart CC crane and derrick standards apply in addition to standard excavator regulations.
What is the legal significance of an 'assured equipment grounding conductor program' when a mini excavator operates near overhead power lines?
Answer: It is an alternative to GFCI protection for cord-connected tools on site, not for the excavator itself
An assured equipment grounding conductor program applies to electrical tools and equipment on site, and does not override minimum approach distance requirements for the excavator near power lines.
When must an excavator operator stop work and contact the utility owner after the utility locating process?
Answer: When excavating within the 'tolerance zone' around marked utility lines
Most state damage prevention laws require hand-digging or vacuum excavation and direct utility owner notification when working within the tolerance zone (typically 18–24 inches) of a marked utility.
Which OSHA standard mandates that employers provide fall protection for workers working at heights of 6 feet or more on construction sites?
Answer: 29 CFR 1926.502
29 CFR 1926.502 specifies fall protection systems criteria and practices for construction, requiring protection at 6 feet or more above lower levels.