Mechanical Aptitude Tools Flashcards
7 cards from real MECHANICAL APTITUDE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Mechanical Aptitude Tools flashcards as text
Which type of pliers is designed to grip and turn round objects like pipes, nuts, and rods at multiple jaw widths without re-adjustment during use?
Answer: Tongue-and-groove (channel-lock) pliers
Tongue-and-groove pliers have an angled jaw and multiple adjustment positions, allowing them to grip various sizes without the jaws changing angle.
A wire stripper is sized by gauge because:
Answer: Each notch is sized to cut insulation without nicking the conductor inside
Matching the notch to the wire gauge ensures only the insulation is cut, leaving the conductor undamaged for reliable connections.
What is the correct way to check if a surface is truly flat using a straightedge?
Answer: Slide the straightedge and look for light gaps beneath it
Holding a precision straightedge against a surface and looking for light gaps (the light test) reveals high and low spots accurately.
Which of the following is a characteristic of a cold chisel that distinguishes it from a wood chisel?
Answer: It is made from hardened tool steel with a blunt, thick edge for cutting metal
Cold chisels are hardened all-steel tools with a robust edge designed to shear metal when struck with a ball-peen hammer.
A nut driver differs from a screwdriver in that it:
Answer: Has a hollow shaft and hex socket to fit over nut heads
A nut driver has a hollow cylindrical socket end that fits hex nuts and drives them without the need for a separate wrench.
When using a hand riveter (pop rivet gun), the mandrel that remains in the tool after setting a rivet is:
Answer: The spent steel pin that is ejected from the rivet during setting
The mandrel (steel pin) is pulled and snapped off during setting, locking the rivet head; the broken mandrel collects in the tool's nose.
Which tool would you use to remove a broken stud that has snapped flush with a metal surface?
Answer: Easy-out (screw extractor)
A screw extractor (easy-out) is drilled into the broken stud and turned counterclockwise to grip and remove it.