Practice Test GeeksMASS Test Practice Test
← All MASS Flashcard Decks

Technical Reading Comprehension Flashcards

7 cards from real MASS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Technical Reading Comprehension flashcards as text

  1. A procedure states: "Drain the tank completely before adding new fluid." If old fluid remains, you should:

    Answer: Finish draining first

    Draining must be complete before adding new fluid.

  2. A spec lists acceptable voltage as 110V ±10V. A reading of 125V is:

    Answer: Above tolerance

    125V exceeds the upper limit of 120V.

  3. A guide says: "Caution indicates possible injury; Danger indicates likely serious injury or death." A 'Danger' label signals:

    Answer: Likely serious injury or death

    'Danger' indicates likely serious injury or death.

  4. A manual reads: "Steps 1 and 2 may be done in any order, but Step 3 must be last." A valid sequence is:

    Answer: 2, 1, 3

    Step 3 must come last, and 2, 1, 3 satisfies that.

  5. A table shows that Model A holds 20 L and Model B holds 35 L. Model B holds how much more than Model A?

    Answer: 15 L

    35 L minus 20 L equals 15 L more.

  6. An instruction states: "Press and hold the reset button for 5 seconds to clear the fault." Briefly tapping the button will:

    Answer: Not clear the fault

    A brief tap does not meet the 5-second hold requirement.

  7. A notice reads: "Authorized personnel only beyond this point." An unauthorized worker should:

    Answer: Not enter

    Only authorized personnel may pass, so others should not enter.