Power Plant Safety Flashcards
6 cards from real MASS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Power Plant Safety flashcards as text
A maintenance technician is about to perform work on a large industrial pump. What is the first and most critical step the technician must take according to standard Lockout/Tagout (LOTO) procedures before beginning any work?
Answer: De-energize, isolate the energy source, and apply a personal lock and tag.
The primary and most critical step in any LOTO procedure is to completely isolate the equipment from its energy source and physically lock it to prevent re-energization. While other steps like notification are part of the overall process, they are not the first step for ensuring the control of hazardous energy.
In the hierarchy of hazard controls, which of the following is considered the last line of defense against a workplace hazard?
Answer: Personal Protective Equipment (PPE).
The hierarchy of hazard controls ranks safety measures from most to least effective. The order is: Elimination, Substitution, Engineering Controls, Administrative Controls, and finally, Personal Protective Equipment (PPE). PPE is the last line of defense because it only protects the individual user and does not remove or reduce the hazard itself.
According to OSHA standards for entering a permit-required confined space, what is the correct order for atmospheric testing?
Answer: Oxygen content, flammable gases, then toxic vapors.
OSHA standard 1910.146 explicitly requires that atmospheric testing in a confined space be conducted in a specific order: first, test for oxygen content; second, for flammable gases and vapors; and third, for potential toxic air contaminants. This sequence is critical for safety and for the proper functioning of testing equipment.
A worker discovers a small fire involving energized electrical equipment in a control room. Several fire extinguishers are available. Which class of fire extinguisher is specifically designed for this situation?
Answer: Class C
Fires are categorized into classes based on their fuel source. A Class C fire involves energized electrical equipment. Class C extinguishers use non-conductive agents, such as carbon dioxide (CO2) or dry chemical, which are safe to use on electrical fires. Using a water-based extinguisher (Class A) would create a severe electric shock hazard.
A technician needs to find information about the first-aid measures to take after accidental skin contact with a specific industrial solvent. In which section of the Safety Data Sheet (SDS) for that solvent would this information be found?
Answer: Section 4: First-Aid Measures
The Globally Harmonized System (GHS) standardizes the format of Safety Data Sheets into 16 sections. Section 4, titled 'First-Aid Measures,' specifically details the necessary responses for exposure via different routes, including skin contact, inhalation, eye contact, and ingestion.
Which of the following is the BEST practice for ensuring safety when preparing to work on a high-pressure steam line?
Answer: Verify the line is properly isolated, de-pressurized, vented, and locked out.
High-pressure steam is extremely dangerous due to high temperatures and pressure. The only safe method is to follow formal procedures to verify that the steam line has been isolated from the source, completely de-pressurized and vented, and secured using Lockout/Tagout procedures. Assumptions and informal checks are unsafe and can lead to catastrophic failure.