Water Quality in Sterile Processing Flashcards
7 cards from real HSPA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Water Quality in Sterile Processing flashcards as text
What is the primary function of reverse osmosis (RO) in a sterile processing water treatment system?
Answer: To remove bacteria and dissolved solids by forcing water through a semipermeable membrane under pressure
Reverse osmosis forces water under pressure through a semipermeable membrane that rejects bacteria, dissolved solids, and other contaminants, producing highly purified water.
What is a water softener primarily designed to remove from the water supply?
Answer: Calcium and magnesium ions that cause water hardness
Water softeners use ion exchange to replace calcium and magnesium ions—which cause water hardness—with sodium or potassium ions, reducing scale formation.
Which components of an RO water system must be regularly maintained or replaced to prevent biofilm formation?
Answer: Pre-filters, membranes, and distribution loop piping
Biofilm can develop on pre-filters, RO membranes, and within distribution loop piping; regular maintenance, sanitization, and scheduled replacement are essential to control microbial contamination.
What is the function of a deionization (DI) resin bed in a sterile processing water treatment system?
Answer: To remove ionic contaminants through exchange with hydrogen and hydroxide ions
DI resin beds use cation and anion exchange resins to remove dissolved ionic contaminants, replacing them with H+ and OH- ions that combine to form pure water.
What does an elevated endotoxin level in instrument rinse water indicate?
Answer: Gram-negative bacterial contamination or bacterial breakdown products are present in the system
Endotoxins are lipopolysaccharides from gram-negative bacterial cell walls; elevated levels signal bacterial contamination or dead bacteria in the water supply or distribution loop.
What is the recommended pH range for critical water used in the final rinse of surgical instruments according to AAMI guidance?
Answer: 5.0–7.0
AAMI guidance recommends a pH of 5.0–7.0 for critical water used in instrument rinsing to minimize corrosion, spotting, and residue formation on instrument surfaces.
Which water quality issue is most commonly associated with white residue or spotting observed on instruments after processing?
Answer: High mineral content (hard water) used during rinsing or in the washer
Hard water with elevated calcium and magnesium content leaves white mineral deposits on instrument surfaces when water evaporates during drying, a condition prevented by using critical water.