Standards, Codes, and Ethics Flashcards
7 cards from real HERS practice questions. Tap to flip, then mark Knew It or Still Learning โ missed cards come back until you master them.
Read the first 7 Standards, Codes, and Ethics flashcards as text
Under RESNET Standards, what is the maximum allowable deviation between a rater's measured duct leakage and a QA reviewer's measurement for QA purposes?
Answer: 10% of total system airflow
RESNET QA standards allow up to 10% deviation between rater and QA reviewer duct leakage measurements before a discrepancy must be investigated.
Which federal law requires raters working in homes built before 1978 to follow lead-safe work practices?
Answer: EPA RRP Rule
The EPA's Renovation, Repair, and Painting (RRP) Rule mandates lead-safe practices in pre-1978 homes to protect occupants and workers.
A HERS rater discovers the builder used non-compliant insulation after the rating is filed. What is the rater's ethical obligation?
Answer: Report the discrepancy to the rater provider and correct the rating
RESNET ethics require raters to correct filed ratings when material non-compliance is discovered and to report through proper channels.
Per RESNET Chapter 3, how often must a rater provider submit QA files to RESNET for oversight review?
Answer: Annually
RESNET requires rater providers to submit annual QA documentation to maintain accreditation and oversight compliance.
Under IECC 2021, what is the maximum allowed total UA (heat loss coefficient) of a building envelope compared to the code reference design?
Answer: Equal to the reference design
The IECC UA trade-off path requires that the proposed building's total UA not exceed the code reference design's total UA.
Which of the following actions by a HERS rater constitutes a conflict of interest under RESNET ethics guidelines?
Answer: Rating a home the rater personally built or owns
Rating a property in which the rater has a direct financial interest (such as ownership or construction) is a prohibited conflict of interest under RESNET standards.
When a HERS rating is performed using the 'sampled' rating approach, what percentage of homes in a builder's sampling group must receive a full confirmed rating?
Answer: 10%
RESNET sampling protocols require a minimum of 10% of homes in a sampling group to receive a full confirmed (tested) rating.