Safety and Equipment Flashcards
6 cards from real Gutter Company practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Safety and Equipment flashcards as text
What tool is used to cut aluminum gutter sections to length at the job site?
Answer: Miter saw with a fine-tooth aluminum-rated blade or aviation snips/tin snips
A power miter saw with a non-ferrous metal blade or aviation snips are the standard tools for clean, accurate cuts on aluminum gutter sections.
What is the purpose of a cordless drill's torque clutch setting when driving gutter screws?
Answer: It limits the torque applied so screws are not over-driven and the gutter is not deformed
Setting the torque clutch prevents over-driving screws, which would strip the screw hole, crack the gutter material, or deform the gutter channel.
What safety precaution is required before using a pneumatic rivet gun on a ladder?
Answer: Ensure the air hose is routed so it cannot pull the ladder or cause loss of balance
The air hose must be managed carefully on a ladder so it cannot snag, pull, or cause the worker to lose balance, which is a leading cause of falls.
What does a stud finder help locate when installing gutter hangers on a new fascia?
Answer: Rafter tails behind the fascia board for more secure fastener placement
Driving gutter screws into rafter tails (detectable through the fascia with a stud finder) provides much stronger attachment than screwing only into the fascia board.
Which of the following is the correct way to pass tools or materials to a coworker on a ladder?
Answer: Use a tool belt, bucket, or material hoist — never throw items to someone on a ladder
Throwing objects to a worker on a ladder is dangerous because it can cause loss of balance; a tool belt, hoist, or second person handing items directly is required.
What is the weight limit consideration when selecting a ladder for a gutter installation job?
Answer: The ladder's duty rating must exceed the combined weight of the worker, clothing, and all tools and materials carried
Ladder duty ratings (Type IAA through Type III) must account for total load including body weight plus all tools, equipment, and materials to prevent overload failure.