Gutter Accessories and Components Flashcards
7 cards from real Gutter Company practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Gutter Accessories and Components flashcards as text
What is the primary purpose of a downspout elbow in a gutter system?
Answer: To change the direction of water flow in the downspout
Downspout elbows are fittings that redirect water flow at angles (typically 45° or 75°) to route downspouts around architectural features or toward the ground.
Which type of gutter hanger is considered the most secure and durable for attaching gutters to a fascia board?
Answer: Hidden bracket hanger
Hidden bracket hangers (also called hidden hangers) screw directly into the fascia board through the gutter, providing a strong connection that resists pulling away from the house.
What is a splash block used for in a gutter drainage system?
Answer: To redirect and slow water at the downspout outlet away from the foundation
Splash blocks are placed beneath downspout outlets to redirect water away from the foundation and prevent soil erosion.
What is the function of a gutter end cap?
Answer: To seal the open end of a gutter run and prevent water from spilling over
End caps are installed at the terminal ends of gutter runs to close off the open ends and ensure all water is directed toward the outlets.
Which gutter accessory is specifically designed to prevent birds and small animals from nesting inside downspouts?
Answer: Downspout cage or critter guard
Downspout cages (critter guards) are mesh or wire screens installed at the top or bottom of downspouts to block animals from entering while still allowing water to flow.
What is the standard inside diameter of a round downspout used on most residential gutter systems in the US?
Answer: 3 inches
The most common residential round downspout has a 3-inch diameter, which is sufficient for typical roof drainage areas and rainfall rates.
What does a downspout extension do?
Answer: Carries water further away from the foundation after leaving the downspout
Downspout extensions are added to the bottom of downspouts to direct water further from the house foundation, helping prevent basement flooding and erosion.