Emergency Procedures Flashcards
6 cards from real ACS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Emergency Procedures flashcards as text
What is a 'Gas Emergency' as defined for reporting purposes under RIDDOR 2013?
Answer: A work-related gas incident that results in death, injury, or dangerous occurrence, which must be reported to the HSE
RIDDOR 2013 requires reporting of gas-related dangerous occurrences, deaths, and injuries arising from gas work to the HSE, in addition to reporting to the gas transporter under GSIUR 1998.
What should a gas engineer do if they are called to a property where the customer reports intermittent headaches and dizziness when at home?
Answer: Treat the symptoms as a potential CO exposure, carry out a thorough inspection of all gas appliances and flues using a combustion analyser and CO detector
Intermittent symptoms that may indicate CO exposure require the engineer to carry out a full investigation of combustion appliances, flues, and CO levels — complacency about potential CO can be fatal.
What is the purpose of the Gas Industry Unsafe Situations Procedure (GIUSP)?
Answer: It provides a consistent framework for gas engineers to classify unsafe gas situations and determine the appropriate response, ensuring national uniformity in how dangers are handled
GIUSP is a nationally agreed procedure that classifies unsafe situations as ID, AR, or NCS and specifies the actions required for each, ensuring all Gas Safe engineers respond consistently to dangerous gas situations.
Under GSIUR 1998, who has the right to inspect gas appliances and fittings in premises?
Answer: A Gas Safe Register inspector, HSE inspector, or authorised person under the Gas Safety (Installation and Use) Regulations
Authorised inspectors under GSIUR 1998 (including Gas Safe inspectors and HSE officers) have the right to enter premises at reasonable times to inspect gas appliances and installations to check compliance.
A gas engineer notices that the CO alarm in a customer's property is more than 7 years old. What should they advise?
Answer: The alarm should be replaced, as CO alarm sensors typically have a service life of 5–7 years after which they may not respond reliably to CO
CO sensor cells have a finite life (typically 5–7 years); after this period, sensitivity degrades and the alarm may fail to activate at dangerous CO concentrations — replacement is essential for continued protection.
What is the obligation on a Gas Safe registered engineer if they suspect that gas work carried out by another party is Immediately Dangerous?
Answer: Take immediate steps to make the situation safe if the customer consents, issue notices, and report the unsafe work to Gas Safe Register
An ID situation found by any Gas Safe engineer requires immediate action regardless of who did the original work — the engineer must make it safe with consent, issue notices, and report the unsafe work to Gas Safe Register.