Building Codes Flashcards
7 cards from real FST practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Building Codes flashcards as text
A fire safety technician is reviewing plans for a high-rise building. Under the IBC, what height threshold defines a high-rise building?
Answer: Over 75 feet in height
IBC Section 403 defines a high-rise building as one with occupied floors more than 75 feet above the lowest level of fire department vehicle access.
Which NFPA standard governs the installation of fire doors and other opening protectives?
Answer: NFPA 80
NFPA 80 (Standard for Fire Doors and Other Opening Protectives) establishes the installation, inspection, testing, and maintenance requirements for fire door assemblies.
Under the IBC, what is the required fire-resistance rating for a fire barrier used to separate a Group I-2 occupancy (hospital) from a Group B occupancy in the same building?
Answer: 2 hours
IBC Table 508.4 requires a 2-hour fire barrier to separate a Group I-2 occupancy from a Group B occupancy when using a separated occupancy approach.
What does the term 'means of egress' encompass according to NFPA 101?
Answer: The exit access, exit, and exit discharge as a complete path
NFPA 101 defines the means of egress as a continuous path consisting of the exit access, the exit itself, and the exit discharge leading to a public way.
Which building code section typically regulates the maximum allowable quantities of hazardous materials in control areas?
Answer: IBC Chapter 3 – Use and Occupancy Classification
IBC Chapter 3 and its associated tables establish maximum allowable quantities (MAQs) of hazardous materials per control area before triggering a Group H occupancy classification.
Under NFPA 101, which term describes an area within a building where occupants can safely wait for assisted evacuation without being in immediate danger from fire?
Answer: Area of rescue assistance
NFPA 101 refers to an 'area of rescue assistance' as a location with direct access to an exit where persons unable to use stairs may await evacuation assistance.
What is the primary purpose of a smoke compartment as required in Group I-2 occupancies under the IBC?
Answer: To limit the spread of smoke and allow defend-in-place evacuation
Smoke compartments in Group I-2 occupancies are designed to contain smoke and allow non-ambulatory patients to be horizontally evacuated to an adjacent safe compartment without leaving the building.