Practice Test Geeks(FST) Fire Safety Technician Certification Practice Test
← All FST Flashcard Decks

Emergency Response Procedures & Safety Protocols Flashcards

7 cards from real FST practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Emergency Response Procedures & Safety Protocols flashcards as text

  1. Under NFPA 10, portable fire extinguishers in an office environment must be visually inspected at minimum how often?

    Answer: Monthly

    NFPA 10 requires a monthly visual inspection of portable fire extinguishers to verify they are in their designated location and show no obvious damage.

  2. Which class of fire involves energized electrical equipment?

    Answer: Class C

    Class C fires involve energized electrical equipment; the primary concern is using a non-conductive extinguishing agent.

  3. What is the correct sequence of steps in the RACE emergency response acronym used in healthcare facilities?

    Answer: Rescue, Alarm, Contain, Extinguish/Evacuate

    RACE stands for Rescue, Alarm, Contain, and Extinguish/Evacuate — the standard fire response protocol in healthcare settings.

  4. During hazmat incident response, the Cold Zone is also referred to as the:

    Answer: Support Zone

    The Cold Zone, or Support Zone, is the outermost area of a hazmat incident where command posts and support functions are established without contamination risk.

  5. What action should a fire safety technician take FIRST upon discovering a fire that has grown beyond incipient stage?

    Answer: Activate the building fire alarm and evacuate

    When a fire is beyond incipient stage, the immediate priority is to activate the alarm to alert all occupants and begin evacuation.

  6. Which NFPA standard specifically addresses fire protection for healthcare occupancies?

    Answer: NFPA 101

    NFPA 101, the Life Safety Code, contains specific occupancy chapters for healthcare facilities addressing egress, suppression, and compartmentation.

  7. A fire door held open by an electromagnetic device must automatically release and close when:

    Answer: The fire alarm activates or power is lost

    Electromagnetic door-hold-open devices must fail-safe by releasing the door upon fire alarm activation or power failure so the door closes to prevent smoke spread.