Practice Test Geeks(FPE) Fire Protection Engineer Certification Practice Test
← All FPE Flashcard Decks

Safety Regulations & OSHA Compliance Flashcards

7 cards from real FPE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Safety Regulations & OSHA Compliance flashcards as text

  1. NFPA 1 (Fire Code) classifies occupancies based on the IBC system. Which High-Hazard group applies to buildings containing materials that are health hazards, such as highly toxic substances?

    Answer: Group H-4

    IBC/NFPA 1 Group H-4 applies to occupancies that contain materials that are health hazards, including highly toxic and toxic materials.

  2. Under OSHA's Lockout/Tagout standard (29 CFR 1910.147), what type of energy source requires special consideration due to stored energy that may not be immediately apparent?

    Answer: Residual or stored energy (e.g., capacitors, springs, gravity)

    29 CFR 1910.147 requires special procedures to relieve, restrain, or otherwise render safe stored or residual energy such as capacitor charge, compressed springs, or suspended loads.

  3. What is the maximum occupant load factor (sq ft per person) for a business occupancy per NFPA 101?

    Answer: 100 sq ft/person

    NFPA 101 assigns a net floor area factor of 100 sq ft per person for business occupancy when calculating occupant load.

  4. OSHA's Respiratory Protection standard (29 CFR 1910.134) requires a written respiratory protection program when respirator use is required. Which element is specifically mandated in the program?

    Answer: Medical evaluation of respirator users before fit testing

    29 CFR 1910.134(e) requires medical evaluation of employees before they are fit tested or required to use a respirator.

  5. Which NFPA standard governs the design and installation of water mist fire suppression systems?

    Answer: NFPA 750

    NFPA 750 is the Standard on Water Mist Fire Protection Systems, addressing design, installation, and maintenance of these specialized suppression systems.

  6. Under the EPA's Risk Management Program (RMP) rule (40 CFR Part 68), facilities with covered substances above threshold quantities in Program 3 must comply with which OSHA standard?

    Answer: 29 CFR 1910.119 (PSM)

    EPA's RMP Program 3 requires facilities to implement a prevention program equivalent to OSHA's Process Safety Management standard (29 CFR 1910.119).

  7. NFPA 72 requires that all fire alarm control units (FACUs) annunciate a trouble signal within how many seconds of detecting an off-normal condition?

    Answer: 300 seconds

    NFPA 72 requires that a trouble signal be annunciated at the fire alarm control unit within 200 seconds, but the receiving station must receive it within 200 seconds — the local annunciation must occur within that same window; the overall transmission to a supervising station must occur within 200 seconds per NFPA 72 Section 10.6.9.