Building Codes & Regulations Flashcards
7 cards from real FPE practice questions. Tap to flip, then mark Knew It or Still Learning โ missed cards come back until you master them.
Read the first 7 Building Codes & Regulations flashcards as text
Under NFPA 101 Life Safety Code, which occupancy classification applies to a building where occupants are restrained and incapable of self-preservation?
Answer: Detention and Correctional
NFPA 101 classifies Detention and Correctional occupancies as those where occupants are restrained and unable to initiate self-evacuation.
The IBC's 'sprinkler increase' for allowable area allows a what percentage increase for a fully NFPA 13 sprinklered building with more than one exit?
Answer: 300%
IBC Section 506.3 allows a 300% increase in allowable floor area when the building is equipped throughout with an NFPA 13 sprinkler system and has more than one exit.
Which IBC section defines 'fire area' as the aggregate floor area enclosed and bounded by fire walls, fire barriers, exterior walls, or horizontal assemblies?
Answer: Section 202
IBC Section 202 (Definitions) defines 'fire area' as the aggregate floor area bounded by fire walls, fire barriers, exterior walls, or fire-resistance-rated horizontal assemblies.
A tenant improvement project in an existing Group B building triggers code compliance. Under IBC Section 1101, the work area approach primarily applies to which type of code?
Answer: IEBC (International Existing Building Code)
The IEBC provides the work area method and other compliance paths specifically for existing buildings undergoing alterations, repairs, or change of occupancy.
What is the primary purpose of a 'horizontal exit' as defined in the IBC and NFPA 101?
Answer: To provide a means of egress to an adjacent compartment on the same floor level
A horizontal exit allows occupants to move from one fire compartment to a refuge area on the same floor level, providing a temporary area of refuge.
Under the IBC, what construction type is defined as having exterior walls of noncombustible materials and interior building elements of any material meeting the required fire-resistance ratings?
Answer: Type III
Type III construction requires noncombustible or limited-combustible exterior walls while permitting any interior structural framing that meets fire-resistance rating requirements.
When a building's height exceeds the tabular limits in IBC Table 504.3, what is the primary code mechanism available to the designer?
Answer: Use an alternative means and methods approach per IBC Section 104.11
IBC Section 104.11 allows the building official to accept alternative materials, design, or methods when the applicant demonstrates equivalent safety.