Practice Test Geeks(FPE) Fire Protection Engineer Certification Practice Test
← All FPE Flashcard Decks

Building Codes & Regulations Flashcards

7 cards from real FPE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Building Codes & Regulations flashcards as text

  1. Under IBC, which occupancy classification applies to a building used for the manufacture of hazardous materials in moderate quantities?

    Answer: Group H-3

    Group H-3 covers occupancies where moderate amounts of hazardous materials are stored or used, posing a physical or health hazard.

  2. What is the maximum allowable height (in stories) for a Type III-B construction building classified as Group B occupancy under the IBC?

    Answer: 3 stories

    IBC Table 504.4 limits Type III-B, Group B occupancy buildings to 3 stories above grade plane without a sprinkler increase.

  3. Which NFPA standard is specifically referenced in the IBC for the design of fire alarm and detection systems?

    Answer: NFPA 72

    NFPA 72, the National Fire Alarm and Signaling Code, is the standard adopted by the IBC for fire alarm system design and installation.

  4. A mixed-use building has a Group A-2 assembly area on the ground floor and Group R-2 residential units above. Under IBC, how must the fire area separation be treated?

    Answer: Separated by a fire barrier with fire-resistance rating per IBC Table 508.4

    IBC Section 508.4 requires that separated mixed occupancies use fire barriers with ratings specified in Table 508.4 based on occupancy pairing.

  5. Under the IBC, what is the minimum fire-resistance rating required for an exterior wall with a fire separation distance of less than 5 feet for a Group R-2 occupancy of Type V-A construction?

    Answer: 2 hours

    IBC Table 602 requires a 2-hour fire-resistance rating for exterior walls of Group R occupancies with fire separation distances less than 5 feet.

  6. Which section of the IBC specifically governs the maximum allowable quantity (MAQ) of hazardous materials in a control area?

    Answer: IBC Section 414

    IBC Section 414 establishes the requirements for hazardous materials, including control areas and maximum allowable quantities.

  7. In the IBC, what is the minimum corridor width required for occupant loads exceeding 50 persons in a non-sprinklered Group E occupancy?

    Answer: 44 inches

    IBC Table 1020.2 requires corridors serving occupant loads greater than 50 in Group E occupancies to be at least 6 feet (72 inches) — however, the minimum for general corridors serving >50 occupants is 44 inches for most non-E occupancies.