Forklift certification Load Handling and Stability Flashcards
7 cards from real Forklift certification Certification practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Forklift certification Load Handling and Stability flashcards as text
What does a forklift's data plate (nameplate) tell the operator about load handling?
Answer: The rated capacity at a specified load center and mast height
The data plate lists rated capacity for a given load center and lift height, which the operator must not exceed.
When picking up a palletized load, how far should the forks enter the pallet?
Answer: Fully, until the pallet is against the fork backrest
Forks should be inserted all the way so the load rests against the backrest for maximum stability.
Making a turn while carrying a raised load is dangerous mainly because it can cause what?
Answer: A lateral (sideways) tip-over
Turning shifts the center of gravity sideways and, with a raised load, can cause the truck to roll over.
Why is it unsafe to add extra counterweight not approved by the manufacturer?
Answer: It alters rated stability and can damage the truck or cause loss of control
Unauthorized counterweight changes the engineered balance and can make the truck unsafe.
When stacking a load on a high rack, what should you do once the load is positioned?
Answer: Level the forks and back straight out slowly
After placing the load, level the forks, withdraw them straight and slowly to avoid disturbing the stack.
How does a wet, slippery, or uneven floor affect load handling?
Answer: It reduces traction and increases tip-over and load-shift risk
Poor floor conditions reduce traction and control, increasing the chance of tipping or dropping the load.
What is the correct tilt position when initially picking up a load from a stack?
Answer: Level or slightly forward to enter, then tilt back once lifted
Forks should be level to enter the pallet, then tilted back after lifting to secure the load.