Practice Test Geeks(FCC) Florida Certified Contractors Practice Test
← All FCC Flashcard Decks

Safety Standards & Construction Practices Flashcards

7 cards from real FCC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Safety Standards & Construction Practices flashcards as text

  1. Florida contractors working with asbestos-containing materials (ACM) must comply with which primary federal regulation?

    Answer: OSHA 29 CFR 1926.1101

    OSHA 29 CFR 1926.1101 is the construction industry asbestos standard governing ACM disturbance, PPE, and worker exposure limits.

  2. What is the permissible exposure limit (PEL) for silica dust set by OSHA for construction workers, as a time-weighted average?

    Answer: 50 µg/m³

    OSHA's Respirable Crystalline Silica standard (1926.1153) set the PEL at 50 µg/m³ as an 8-hour TWA.

  3. When using powder-actuated tools on a Florida job site, who must operate the tool?

    Answer: A worker certified by the tool's manufacturer or equivalent training

    OSHA 1926.302(e) requires that powder-actuated tools be operated only by workers who have been trained and certified by the tool's manufacturer.

  4. What is the minimum diameter of a safety line (lifeline) used in personal fall arrest systems per OSHA standards?

    Answer: 3/8 inch

    OSHA 1926.502(d) requires lifelines used in personal fall arrest systems to have a minimum diameter of 3/8 inch.

  5. Under Florida law, when must a contractor notify the building department of a 'threshold building' project reaching a structural concrete pour?

    Answer: 24 hours before the pour

    Florida Statute 553.79 requires the contractor to notify the building department at least 24 hours before each structural concrete pour on a threshold building.

  6. Which agency administers the 'Sunshine State One Call' system that Florida contractors must contact before digging?

    Answer: Sunshine 811 (formerly Sunshine State One Call of Florida)

    Sunshine 811 administers Florida's underground utility notification system; contractors must call or submit online at least 2 business days before excavating.

  7. What is the required guard rail height for a floor opening, hole, or elevated platform edge per OSHA construction standards?

    Answer: 42 inches minimum

    OSHA 1926.502(b) requires top rails of guardrail systems to be 42 inches (plus or minus 3 inches) above the walking/working surface.