Practice Test Geeks(FBI) Federal Bureau of Investigation Certified Marksman Practice Test
← All FBI Flashcard Decks

Weapon Handling & Safety Procedures Flashcards

7 cards from real FBI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Weapon Handling & Safety Procedures flashcards as text

  1. When holstering a semi-automatic pistol after firing, what is the correct sequence?

    Answer: Decock or engage safety, scan surroundings, then holster

    After firing, agents must decock or engage the safety (if applicable), conduct a tactical scan of surroundings, then holster deliberately to avoid negligent discharge.

  2. What does 'trigger discipline' mean in FBI firearms training?

    Answer: Keeping the finger off the trigger until sights are on target and decision to shoot is made

    Trigger discipline means keeping the trigger finger straight and outside the trigger guard until the shooter has made a conscious decision to fire.

  3. An FBI agent discovers a firearm left in an interview room. What is the FIRST action?

    Answer: Treat it as loaded, secure the area, and follow evidence protocols

    Any unattended firearm must be treated as loaded; the agent should secure the area and follow proper evidence and chain-of-custody protocols.

  4. Which condition describes a firearm with a round chambered, full magazine, and safety engaged?

    Answer: Condition 1

    Condition 1 (also called 'cocked and locked' for single-action pistols) means a round is chambered, the magazine is inserted, and the safety is on.

  5. During a weapons inspection, an agent finds a corroded firing pin. What should be done?

    Answer: Remove the weapon from service and submit it to the armorer

    A corroded firing pin is a mechanical defect that must be evaluated by a qualified armorer before the weapon can be returned to service.

  6. What is the purpose of a 'weapons check' or 'press check'?

    Answer: To visually or tactilely confirm a round is chambered

    A press check involves slightly opening the slide to visually or tactilely confirm a round is chambered without fully cycling the action.

  7. FBI protocol requires agents to perform a function check after cleaning their weapon. Which step verifies the firing pin is functioning?

    Answer: With an empty chamber, pull the trigger and confirm the hammer/striker falls

    A dry-fire function check with an empty, verified-clear chamber confirms that the trigger mechanism and firing pin/striker are operating correctly.