Fire Safety Systems Flashcards
7 cards from real F80 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Fire Safety Systems flashcards as text
Which type of smoke detector is generally more sensitive to slow, smoldering fires that produce large combustion particles?
Answer: Photoelectric detector
Photoelectric detectors use a light beam scattered by larger smoke particles and respond faster to slow, smoldering fires than ionization detectors.
What is the purpose of a fire department connection (FDC) on a sprinkler or standpipe system?
Answer: To provide an external connection for the fire department to supplement water supply
The FDC (Siamese connection) allows fire department pumpers to inject water into a sprinkler or standpipe system to supplement or replace the normal water supply during a fire.
According to IBC and NFPA 101, a corridor serving an occupant load of 50 or more must have a minimum clear width of:
Answer: 44 inches
IBC Section 1005 and NFPA 101 require a minimum 44-inch clear corridor width when serving an occupant load of 50 or more persons.
What distinguishes a 'Class I' standpipe system from a 'Class II' standpipe system?
Answer: Class I provides 2½-inch hose connections for fire department use; Class II provides 1½-inch hose stations for occupant use
Class I standpipes supply 2½-inch connections intended for trained fire department personnel, while Class II standpipes supply 1½-inch hose stations for first-aid use by occupants.
A 'deluge' sprinkler system differs from a standard wet pipe system because:
Answer: All sprinkler heads are open and water flows to all heads simultaneously upon system activation
Deluge systems have all sprinklers open (no fusible element) and discharge water simultaneously through all heads when a detection device opens the deluge valve.
Under NFPA 10, portable fire extinguishers must be inspected at a minimum of every:
Answer: 30 days
NFPA 10 requires that portable fire extinguishers be visually inspected at least monthly to confirm they are accessible, charged, and undamaged.
Which condition would cause a supervisory signal (not an alarm) on a fire alarm control panel?
Answer: A sprinkler control valve moved to a partially closed position
A tamper switch on a partially closed control valve generates a supervisory signal, indicating an abnormal but non-emergency condition that could impair fire protection.