F80 Equipment Operation Flashcards

When traveling with a load on a forklift, the forks should be positioned at what height from the ground?

Answer: 6 to 8 inches

Forks should be carried 6 to 8 inches above the ground to provide clearance while maintaining a low center of gravity for stability.

Which condition should prompt an operator to immediately remove a forklift from service?

Answer: Cracked or bent forks

Cracked or bent forks are a critical safety defect that can cause load failure and must be reported and the equipment taken out of service immediately.

What is the correct procedure when a forklift operator needs to pick up a load on a ramp or incline?

Answer: Back up the ramp with the load side facing uphill

On an incline, always keep the load on the uphill side by backing up the ramp with the load, preventing the load from sliding off the forks.

What is the purpose of the counterweight on a sit-down counterbalanced forklift?

Answer: To balance the weight of the load on the forks

The counterweight at the rear of the forklift offsets the weight of the load being carried on the forks to prevent the machine from tipping forward.

When stacking loads, an operator notices the upper load is leaning to one side. What should the operator do?

Answer: Lower the load, re-position it on the pallet, and re-stack

A leaning or unstable load must be lowered and properly repositioned before stacking continues to prevent collapse.

How should a forklift operator approach a blind corner or intersection?

Answer: Slow down, sound the horn, and proceed cautiously

Slowing down, sounding the horn, and proceeding cautiously at intersections alerts pedestrians and other operators to the forklift's approach.

What is 'load creep' and why is it dangerous on a forklift?

Answer: The slow drift of hydraulic fluid causing forks to lower unexpectedly

Load creep is the gradual lowering of forks due to hydraulic fluid seeping past worn seals, which can cause the load to drop unexpectedly.