Equipment Operation Flashcards
7 cards from real F80 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Equipment Operation flashcards as text
Before entering a trailer to unload freight, an operator should verify:
Answer: That the trailer is properly chocked or restrained and the landing gear is down
Trailer creep or separation from the dock while a forklift is inside can cause the truck to fall into the gap, so wheel chocks or trailer restraints are mandatory.
How does driving over a floor drain or uneven surface affect forklift stability?
Answer: It can momentarily shift the center of gravity and increase tip-over risk
Uneven surfaces cause the frame to flex and can shift the combined center of gravity outside the stability triangle, especially with elevated or off-center loads.
An operator is asked to use a forklift to elevate a worker on an elevated work platform. What is required?
Answer: An approved work platform with guardrails must be used and the forklift must be attended at all times
OSHA requires an approved, properly secured personnel platform with guardrails, and the operator must remain at the controls whenever a worker is elevated.
What should an operator do if they find a spill of unknown liquid on the warehouse floor?
Answer: Avoid the area, report it, and wait for it to be cleaned up before resuming work in that zone
Unknown spills may be flammable or slippery, creating both fire and tip-over hazards; the area must be avoided and reported immediately.
Why should a forklift operator never make a sharp turn at high speed?
Answer: High-speed turns can cause the forklift to tip over laterally
High-speed turns create centrifugal force that can push the center of gravity outside the stability triangle, causing a side tip-over.
What is the primary risk when traveling with forks elevated too high?
Answer: Raised center of gravity that greatly increases tip-over risk
Elevating the forks raises the combined center of gravity, dramatically reducing lateral stability and making the forklift much more prone to tipping.
When a forklift is left unattended, the operator must:
Answer: Lower the forks, apply the parking brake, and remove the key or disconnect the battery
An unattended forklift must have forks lowered, parking brake set, and the key removed to prevent unauthorized use or accidental movement.