F60 Fire Guard Duties & Responsibilities 4

Question 1

Which of the following best describes 'fire watch' as defined by FDNY rules?

Accepted Answer

Continuous observation of the work area for fire hazards during and after hot work

Answer

A scheduled inspection done once per shift

Answer

Remote monitoring via a camera system

Answer

A buddy system where workers watch each other

Question 2

A fire guard's Certificate of Fitness has expired. What must occur before they can legally perform fire guard duties?

Accepted Answer

Renew the certificate with FDNY before performing any fire guard duties

Answer

Work under supervision until renewal is processed

Answer

Obtain a temporary permit from the building owner

Answer

Complete a refresher course and resume duties immediately

Question 3

During a post-work fire watch, the fire guard detects a small smoldering spot. The extinguisher fully suppresses it. What must the fire guard do next?

Accepted Answer

Resume the fire watch and document the incident

Answer

Declare the area safe and end the watch early

Answer

Immediately call the building owner

Answer

Evacuate the building as a precaution

Question 4

What is the minimum distance combustible materials must be kept from torch operations under standard FDNY guidelines?

Accepted Answer

35 feet

Answer

10 feet

Answer

25 feet

Answer

50 feet

Question 5

A building has sprinklers, but a section is under maintenance and sprinklers are temporarily out of service. How does this affect fire guard duties?

Accepted Answer

Additional precautions and increased vigilance are required in the affected area

Answer

Fire guard duties are suspended since sprinklers will return soon

Answer

Torch operations can proceed normally since the rest of the building is protected

Answer

The contractor assumes fire guard responsibility in that section

Question 6

What action should a fire guard take if FDNY inspectors arrive at the job site during torch operations?

Accepted Answer

Produce the Certificate of Fitness and hot work permit for review

Answer

Ask the contractor to speak with inspectors first

Answer

Pause work until the inspection is complete

Answer

Direct inspectors to the building management office

Question 7

Which factor is the fire guard responsible for verifying on the hot work permit before torch operations begin?

Accepted Answer

That the permit is valid for the specific location and time of the work

Answer

Worker union membership status

Answer

The contractor's tax identification number

Answer

Equipment rental agreements