F60 Torch Operation Safety Questions and Answers

Question 1

A Fire Guard is assigned to a torch operation where the operator is using oxygen and acetylene. Which of the following is a critical safety requirement for the gas cylinders?

Accepted Answer

They must be secured in an upright position.

Answer

They must be stored at least 10 feet from the operation.

Answer

They should be laid on their side to prevent tipping.

Answer

They can be used even if oil or grease is present on the fittings.

Question 2

A Fire Guard is overseeing a torch operation in a designated hot work area. What is true about the permit requirements for this specific location?

Accepted Answer

The area is exempt from the daily permit requirement but must be inspected annually.

Answer

A new hot work permit must be filed with the FDNY every day.

Answer

No permits or inspections are required once an area is designated for hot work.

Answer

A citywide permit is the only type of permit valid for a designated area.

Question 3

During a torch operation, sparks and slag might fall through a small floor opening to the level below. The area below contains combustible materials within 35 feet of the opening. What action is required by FDNY regulations?

Accepted Answer

An additional F-60 Fire Guard is required to conduct a fire watch on the floor below.

Answer

The operator must work more carefully to avoid dropping sparks.

Answer

The fire guard on the main level must occasionally check the floor below.

Answer

A single fire guard can watch both levels if they are within 50 feet of each other.

Question 4

A torch operator holds a citywide permit and needs to begin work at a new location. What must the permit holder do before starting the operation?

Accepted Answer

Notify the building owner in writing at least 48 hours before work begins.

Answer

Receive verbal permission from the on-site property manager.

Answer

Post a copy of the citywide permit at the building entrance for 24 hours.

Answer

Contact the local firehouse to announce the start of the operation.

Question 5

Which of the following conditions mandates the presence of an F-60 Fire Guard during torch operations?

Accepted Answer

When the operation is conducted on a construction site.

Answer

Only when working with acetylene gas.

Answer

Only for operations lasting longer than one hour.

Answer

When the work is performed outdoors in an open area.

Question 6

A fire guard is assigned to monitor two separate torch operations on the same floor. Under what condition is this permissible for a single fire guard?

Accepted Answer

If the fire guard has an unobstructed view and each operation is no more than 50 feet away.

Answer

If the two operators are within 100 feet of the fire guard.

Answer

If both torch operators have their own portable fire extinguishers.

Answer

It is never permissible for one fire guard to monitor two operations.