Torch Operations & Combustibles Flashcards
7 cards from real F60 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Torch Operations & Combustibles flashcards as text
Under FDNY regulations, who is responsible for ensuring a certified fire guard is present during torch operations?
Answer: The general contractor or employer
The general contractor or employer is responsible for ensuring a certified F60 fire guard is on duty during all torch operations.
Which condition would STOP torch operations immediately until corrected?
Answer: A missing or discharged fire extinguisher in the work area
Torch operations cannot proceed without a fully charged, appropriate fire extinguisher immediately available at the work site.
When performing torch operations through a roof deck, what hazard below must the fire guard be aware of?
Answer: Heat transfer and ignition of combustibles in the space below
Heat from torch operations can transfer through the roof deck and ignite combustible materials in the ceiling or floor space below.
Propane gas used in some torch operations is heavier than air. What is the danger of this property?
Answer: It settles in low areas and can accumulate to explosive concentrations
Because propane is heavier than air, it settles in low-lying areas such as basements and crawl spaces where it can reach explosive concentrations.
What is the correct procedure when relocating a pressurized fuel gas cylinder used in torch operations?
Answer: Use an approved hand truck or cylinder cart with the valve closed and cap secured
Pressurized cylinders must be moved using an approved hand truck with the valve closed and protective cap in place to prevent damage.
How should a fire guard document their presence and observations during torch operations?
Answer: In a hot work log or permit form, noting inspection times and any hazards found
The fire guard must maintain a hot work log documenting inspection times, safety conditions, and any hazards identified or corrected.
Torch operations near a skylight with a plastic dome present which specific fire risk?
Answer: The plastic dome can melt from radiant heat and drip flaming material below
Plastic skylights can melt and drip flaming material onto occupants or combustibles below when exposed to torch radiant heat.