Permits and Record Keeping Flashcards
7 cards from real F60 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Permits and Record Keeping flashcards as text
What is the significance of the 'post-work fire watch period' noted on a Hot Work Permit?
Answer: It mandates the Fire Guard remain on site for a specified time after torch operations end to watch for delayed ignition
Smoldering materials can ignite fires well after the heat source is removed, so the post-work watch period—typically at least 30 minutes to 1 hour—guards against this.
A Fire Guard discovers that a previous torch operation left scorch marks not recorded in the fire watch log. What is the BEST course of action?
Answer: Document the discovery in the current log and notify the supervisor before authorizing new operations
Undocumented prior damage must be noted in the current log and reported to the supervisor; it may indicate an ongoing hazard that could affect permit conditions.
Which statement about Hot Work Permits and weekend or holiday operations is correct?
Answer: A separate permit is required for each day of operations, including weekends and holidays
Each day of torch operations—including weekends and holidays—requires its own valid Hot Work Permit.
What should the Fire Guard do if the site supervisor instructs them to begin torch operations before the Hot Work Permit arrives?
Answer: Refuse to allow operations to start until the valid permit is in hand and posted on site
The Fire Guard must refuse to authorize commencement of operations until a valid Hot Work Permit is physically present and posted at the work site.
Which record must be presented to an FDNY inspector upon request during torch operations?
Answer: The current Hot Work Permit and the fire watch log
FDNY inspectors must be shown the active Hot Work Permit and the fire watch log to verify compliance with all regulatory requirements.
When multiple contractors are working at different locations within the same building under separate Hot Work Permits, what does each Fire Guard's log need to specify?
Answer: The specific floor, room, or area covered by that Fire Guard's watch
Each fire watch log must clearly specify the exact area of coverage so that accountability is clear when multiple operations occur in the same building.
What is the correct procedure when torch operations must resume after an unplanned stoppage that caused the permit to expire?
Answer: Obtain a new Hot Work Permit before resuming any torch operations
An expired permit cannot be reactivated; a new Hot Work Permit must be issued before any torch operations resume, regardless of the reason for the stoppage.