Gas Cylinder Storage and Handling Flashcards
7 cards from real F60 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Gas Cylinder Storage and Handling flashcards as text
What labeling is required on compressed gas cylinders used at job sites?
Answer: Proper hazard labels identifying the gas contents and hazards
OSHA and FDNY regulations require compressed gas cylinders to bear proper hazard labels identifying the gas type and its associated dangers.
How frequently must flexible hoses used in torch operations be inspected for damage?
Answer: Before each use
Hoses must be inspected before every use for cuts, burns, abrasions, or loose fittings that could allow dangerous gas leaks during operations.
What are the standard color codes for oxygen and fuel gas hoses used in torch operations?
Answer: Green for oxygen, red for fuel gas
The industry standard uses green hoses for oxygen and red hoses for fuel gas to prevent dangerous cross-connections between incompatible gases.
Which defect makes a compressed gas cylinder immediately unfit for continued use?
Answer: A dented, damaged, or difficult-to-operate valve
A damaged valve may fail to seal properly, allow uncontrolled gas release, or prevent emergency shutoff, making the cylinder immediately unsafe to use.
If a gas cylinder develops a leak that cannot be stopped, what is the proper course of action?
Answer: Move the cylinder outdoors away from ignition sources and notify the fire department
Moving the leaking cylinder outdoors removes it from confined spaces, allows safe gas dispersal, and reduces explosion risk while professional help is summoned.
Which document must be readily accessible on site for all compressed gases being used?
Answer: Safety Data Sheets (SDS) for each gas in use
OSHA's Hazard Communication Standard requires Safety Data Sheets (SDS) to be accessible for all hazardous chemicals, including all compressed gases used on site.
How must compressed gas cylinders be secured when transported in a vehicle?
Answer: Upright and secured to prevent movement, with valve protection caps installed
Cylinders must remain upright during transport and be secured against movement, with valve protection caps on to protect the valve from impact damage.