Fire Guard Responsibilities Flashcards
7 cards from real F60 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Fire Guard Responsibilities flashcards as text
What is the maximum number of torch operators a single fire guard may monitor simultaneously?
Answer: One fire guard must be assigned to each torch operator
Each torch operator must have their own dedicated fire guard; one fire guard cannot safely monitor multiple torch operators at the same time.
During torch operations, a fire guard notices smoke coming from a wall cavity. The torch operator says the smoke is from old paint and is not a fire. The fire guard should:
Answer: Immediately stop operations and investigate the smoke source before continuing
The fire guard has independent authority and responsibility to stop operations whenever there is any sign of possible fire, regardless of the torch operator's opinion.
Which of the following is a required element of the pre-work inspection conducted by the fire guard?
Answer: Identifying the location of the nearest fire alarm pull station and exit
The fire guard must locate the nearest fire alarm pull station and exits during the pre-work inspection so they can respond immediately in an emergency.
Under New York City Fire Code, who is responsible for ensuring that an F-60 fire guard is present during torch operations?
Answer: The permit holder or person in charge of the hot work operation
Under NYC Fire Code, the permit holder or person in charge of the hot work operation is responsible for ensuring a certified fire guard is present.
A fire guard is assigned to monitor torch work on a roof during windy conditions. Which specific hazard requires heightened attention?
Answer: Wind-blown sparks and embers igniting combustibles beyond the 10-foot clearance zone
Windy conditions can carry sparks and embers far beyond the standard 10-foot clearance zone, requiring the fire guard to expand their monitoring area accordingly.
After completing the 1-hour post-operation fire watch, the fire guard departs and a fire is reported 2 hours later in the work area. What does this situation indicate?
Answer: The 1-hour watch was insufficient and future watches should be extended based on conditions
This scenario illustrates that fire guards must use judgment to extend the watch period beyond 1 hour when conditions such as heavy combustible loads or concealed spaces warrant additional monitoring.
Which record must be maintained at the work site and made available to FDNY inspectors during torch operations?
Answer: The hot work permit, fire guard certificate, and fire watch log
The hot work permit, the fire guard's F-60 certificate, and the fire watch log must all be available at the work site for inspection by FDNY at any time.