Fire Regulations and Codes Flashcards
6 cards from real F01 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Fire Regulations and Codes flashcards as text
Which FDNY regulation governs the requirement for an F-01 Certificate of Fitness holder to be present during torch operations?
Answer: NYC Fire Code Section 2604 and FDNY rules regarding hot work operations
NYC Fire Code Section 2604 and related FDNY rules specifically address hot work operations and require the presence of an F-01 Certificate of Fitness holder during torch operations.
A hot work permit is required by FDNY for torch operations. Who is authorized to issue this permit?
Answer: The building owner or their designated representative, after reviewing fire safety conditions
The hot work permit must be issued by the building owner or their designated authorized representative, who confirms that the required safety conditions and fireguard coverage are in place.
Under NYC Fire Code, what is the minimum clearance of combustible materials that must be maintained around a torch operation?
Answer: 10 feet in all directions
FDNY and NFPA 51B require a minimum 35-foot clearance of combustibles from the hot work point. However, NYC Fire Code and many building contexts reference a 10-foot minimum for materials that cannot be removed — and 35 feet for loose combustibles.
Under the NYC Fire Code, which of the following triggers the requirement for an F-01 fire guard rather than an F-03 (general fire guard)?
Answer: The use of open flames or torch operations for roofing, waterproofing, or similar work
The F-01 CoF is specifically required when open flames or torches are used for construction operations such as roofing, waterproofing, or similar hot work. The F-03 covers general fire watch without open flames.
NYC Fire Code requires that the hot work permit be kept where during torch operations?
Answer: Posted or immediately accessible at the hot work site for inspection
The hot work permit must be kept at the hot work site and be immediately available for review by any FDNY inspector who may arrive during operations.
If FDNY discovers that torch operations are being conducted without a hot work permit, what is the likely consequence?
Answer: An order to immediately stop work and a fine issued to the building owner and/or contractor
Conducting torch operations without a required hot work permit results in an immediate stop-work order and fines. The building owner, contractor, and potentially the fireguard can all face violations.