F01 F01 NYC Fire Alarm Systems and Devices

Question 1

What is the primary purpose of a manual pull station in a fire alarm system?

Accepted Answer

To manually initiate a fire alarm signal

Answer

To test the system automatically

Answer

To silence the alarm

Answer

To notify the fire department directly

Question 2

When a fire alarm control panel (FACP) shows a 'trouble' signal, what does this typically indicate?

Accepted Answer

A fault or malfunction exists within the system

Answer

A fire has been detected

Answer

The system has been silenced

Answer

All zones are clear

Question 3

Under NYC Fire Code, how often must fire alarm systems in most buildings be inspected by a licensed contractor?

Accepted Answer

Annually

Answer

Monthly

Answer

Every 6 months

Answer

Every 2 years

Question 4

What does a 'supervisory' signal on a fire alarm panel typically indicate?

Accepted Answer

A monitored device such as a valve has changed to an abnormal position

Answer

A fire alarm has been activated

Answer

The system battery is fully charged

Answer

A fire drill is in progress

Question 5

Which type of smoke detector detects smoke particles by measuring how they scatter a beam of light?

Accepted Answer

Photoelectric smoke detector

Answer

Ionization smoke detector

Answer

Heat detector

Answer

Duct smoke detector

Question 6

What action should a fire guard take immediately upon the activation of a fire alarm?

Accepted Answer

Investigate the zone indicated and notify FDNY if fire is confirmed

Answer

Wait for confirmation before acting

Answer

Silence the alarm at the panel

Answer

Evacuate the entire building without investigating