Practice Test Geeks(F-03) Fire Guard F-03 Practice Test
← All F-03 Flashcard Decks

Equipment and Systems Flashcards

6 cards from real F-03 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Equipment and Systems flashcards as text

  1. What type of fire extinguisher is most commonly found in places of assembly?

    Answer: ABC multi-purpose dry chemical

    ABC multi-purpose dry chemical extinguishers are the most common in places of assembly because they can handle ordinary combustibles (A), flammable liquids (B), and electrical fires (C).

  2. The acronym PASS describes the proper use of a fire extinguisher. What does it stand for?

    Answer: Pull, Aim, Squeeze, Sweep

    PASS stands for Pull the pin, Aim at the base of the fire, Squeeze the handle, and Sweep from side to side. This is the universally taught method for extinguisher use.

  3. How far away should you stand when using a fire extinguisher?

    Answer: 6-8 feet

    Stand approximately 6-8 feet away from the fire when using an extinguisher. This distance provides effective agent delivery while maintaining a safe distance from heat and flames.

  4. What should a fire guard check when inspecting a fire extinguisher?

    Answer: Pressure gauge in green zone, seal intact, no visible damage, accessible

    Inspection includes checking the pressure gauge (green zone), ensuring the safety seal is intact, looking for physical damage, verifying accessibility, and confirming the inspection tag is current.

  5. What is the purpose of a standpipe system in a place of assembly?

    Answer: To supply water to firefighters on upper floors through hose connections

    Standpipe systems are fixed water supply systems with hose connections on each floor, allowing firefighters to connect hoses and fight fires on upper floors without running hoses up stairways.

  6. How does a fire guard verify that the fire alarm system is in working order?

    Answer: By checking the fire alarm control panel for trouble signals or alarms

    The fire guard should check the fire alarm control panel for any trouble signals, supervisory signals, or active alarms that indicate system issues, without activating the system during an event.