← All Epic Skills Assessment Flashcard Decks

Data and Chart Interpretation Flashcards

7 cards from real Epic Skills Assessment practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Data and Chart Interpretation flashcards as text
  1. An Epic dashboard displays a dual-axis chart with bars for patient volume (left axis, hundreds) and a line for average length of stay (right axis, days). In April, the bar reaches 300 and the line is at 4.2. What does each data point represent?

    Answer: 300 patients with 4.2 days average stay

    The left axis unit is hundreds, so 300 on that scale = 300 patients, and the right axis measures days, so 4.2 = 4.2 days average length of stay.

  2. A control chart for hand hygiene compliance shows a center line at 80%, upper control limit at 94%, and lower control limit at 66%. A data point falls at 97%. What does this indicate?

    Answer: An unusually high result that may warrant investigation

    A point above the upper control limit (94%) indicates a special cause variation — an unusual result that falls outside expected process behavior and should be investigated.

  3. A table compares two patient groups: Group A (n=50) with 6 adverse events, and Group B (n=200) with 16 adverse events. Which group has the higher adverse event rate?

    Answer: Group A

    Group A rate = 6/50 = 12%; Group B rate = 16/200 = 8% — Group A has a higher adverse event rate despite fewer absolute events.

  4. A stacked bar chart shows patient fall risk categories per unit. The Orthopedic unit bar is tallest and the High Risk segment fills 60% of the bar. The ICU bar is shorter but High Risk fills 80%. Which unit has more high-risk patients?

    Answer: Cannot be determined without knowing total patient counts

    Without knowing the actual total number of patients in each unit, the absolute number of high-risk patients cannot be determined from percentages and bar height alone.

  5. Epic's sepsis alert dashboard shows an alert fired at 14:00 but the first antibiotic was given at 15:30. What is the response time lag?

    Answer: 90 minutes

    From 14:00 to 15:30 is 1 hour and 30 minutes, which equals 90 minutes.

  6. A histogram displays the distribution of patient ages on a medical unit. The tallest bar spans ages 65–74. What does this indicate?

    Answer: The 65–74 age group is the most frequently occurring on this unit

    In a histogram, the tallest bar represents the age interval with the highest frequency — the most common age range among patients, not the average or only age group.

  7. A run chart of daily patient satisfaction scores shows 8 consecutive data points all above the median line. What does this signal?

    Answer: A likely real shift in the process

    By run chart rules, 8 or more consecutive points on the same side of the median is a signal of non-random variation indicating a likely real shift in the process.