EPA 608 Universal Practice Test 2 Flashcards

A Universal-certified technician under EPA Section 608 is qualified to service which types of equipment?

Answer: Type I, Type II, and Type III equipment

Universal certification under EPA Section 608 qualifies a technician to service all three categories: Type I (small appliances), Type II (high-pressure systems other than small appliances), and Type III (low-pressure systems). Universal certification is the most comprehensive and is required for technicians who may work on any type of stationary refrigeration or air conditioning equipment. It does NOT automatically cover MVAC systems, which require separate Section 609 certification.

Which refrigerant is used in both high-pressure and very low-pressure applications and is considered a natural refrigerant?

Answer: R-717 (ammonia)

R-717 (ammonia, NH3) is a natural refrigerant used across a very wide range of applications from food processing and cold storage (high-pressure) to large industrial refrigeration systems. Ammonia has an ODP of zero, a GWP of zero, and excellent thermodynamic properties. However, it is toxic and requires special safety training and handling procedures distinct from synthetic refrigerants covered under Section 608.

What is the first step a Universal-certified technician should take when arriving at a system with an unknown refrigerant charge?

Answer: Identify the refrigerant type using a refrigerant analyzer before connecting any equipment

Identifying the refrigerant type before connecting equipment is critical. Using a refrigerant analyzer determines what is in the system, preventing cross-contamination of recovery cylinders, ensuring compatible service tools are used, and verifying the system has not been converted to an alternative refrigerant. Connecting manifold gauges without knowing the refrigerant type risks mixing incompatible substances in hoses.

Which of the following best describes an azeotropic refrigerant blend?

Answer: A blend that behaves like a pure single-component refrigerant with no temperature glide

An azeotropic blend behaves like a pure compound — it has a single boiling point and does not fractionate. R-500, R-502, and R-507A are examples of azeotropic or near-azeotropic blends. Zeotropic blends (like R-404A and R-410A) exhibit temperature glide — different boiling points for each component. Knowing blend type affects how technicians charge and service systems.

What is the role of a receiver in a high-pressure refrigeration system?

Answer: To store excess liquid refrigerant and ensure a continuous supply to the expansion device

The receiver stores liquid refrigerant between the condenser and the expansion device. It provides a reservoir that accommodates variations in system refrigerant charge during different operating conditions (temperature, load), ensures a steady supply of liquid to the expansion device, and allows technicians to isolate refrigerant in the receiver for service via pump-down procedures.

A Universal-certified technician verifies that an R-410A system is properly charged using which two measurements together?

Answer: Suction superheat and liquid line subcooling

The industry-standard method for verifying charge level in an R-410A (or any fixed-orifice or TXV) system is to measure suction superheat at the evaporator outlet and liquid line subcooling at the condenser outlet. These two measurements together indicate whether the charge is correct, too high, or too low. Proper superheat and subcooling values are specified by the equipment manufacturer.