Cabling Standards Flashcards
7 cards from real DCI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Cabling Standards flashcards as text
Which TIA/EIA standard defines the minimum requirements for telecommunications cabling infrastructure in commercial buildings?
Answer: TIA-568-C.1
TIA-568-C.1 specifies the general requirements for commercial building telecommunications cabling systems.
What is the maximum horizontal cable run distance specified by ANSI/TIA-568 for Category 6 UTP?
Answer: 90 meters
ANSI/TIA-568 limits horizontal cable runs to 90 meters (295 ft) to allow for patch cables and equipment cords within the 100-meter channel.
Which standard governs the installation of optical fiber cabling in commercial buildings in the US?
Answer: TIA-568-C.3
TIA-568-C.3 specifically covers optical fiber cabling components and transmission requirements.
ANSI/TIA-606 is the standard that addresses which aspect of structured cabling?
Answer: Administration and labeling
ANSI/TIA-606 is the Administration Standard for Telecommunications Infrastructure, covering labeling and documentation.
What does the ISO/IEC 11801 standard primarily address?
Answer: Generic cabling for customer premises internationally
ISO/IEC 11801 is the international standard for generic cabling systems for customer premises, equivalent to TIA-568 globally.
Which ANSI/TIA standard specifically covers grounding and bonding for telecommunications systems?
Answer: TIA-607-B
ANSI/TIA-607-B is the standard for commercial building grounding and bonding requirements for telecommunications.
In the TIA-568 standard, what is the defined maximum length of a work area cord (equipment cord at the user end)?
Answer: 10 meters
TIA-568 allows up to 10 meters combined for work area and equipment cords, but individual cords must fit within the total channel budget.