Safety Procedures & Compliance Flashcards
7 cards from real CWT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety Procedures & Compliance flashcards as text
When inspecting a floor scale pit, which confined space entry requirement typically applies?
Answer: Atmospheric testing for oxygen and hazardous gases before entry
Confined space entry regulations require atmospheric testing for oxygen deficiency and hazardous gases before any worker enters a pit or enclosed area.
What is the correct action if a technician discovers a scale has been knowingly used to defraud buyers by a client?
Answer: Refuse to certify the scale and report the suspected fraud to weights and measures authorities
A CWT must refuse to certify equipment used for fraudulent purposes and is obligated to report suspected fraud to the appropriate regulatory authority.
Which PPE is most critical when working around energized electrical components of a weighing system?
Answer: Insulated gloves rated for the voltage level present
Insulated gloves rated for the appropriate voltage are essential to protect against electric shock when working near energized components.
A truck scale approach ramp has a crack extending across its full width. The appropriate response is to:
Answer: Take the scale out of service until the structural defect is repaired
A full-width crack in a structural approach ramp is a safety hazard that requires the scale to be taken out of service until properly repaired.
Under NIST Handbook 44, which action must a W&M inspector take if a device is found to violate a 'Type Evaluation' requirement?
Answer: Condemn and seal the device against use
Devices that fail type evaluation requirements must be condemned and sealed to prevent their continued use in commerce.
What is the primary purpose of lockout/tagout (LOTO) procedures when servicing a scale conveyor system?
Answer: To prevent unexpected energization or movement that could injure the technician
LOTO procedures prevent unexpected startup or release of stored energy, protecting technicians from injury during servicing.
When lifting test weights exceeding 50 lbs, the safest practice is to:
Answer: Use mechanical lifting aids or team lift with a partner
Mechanical lifting aids or team lifting prevents musculoskeletal injuries when handling test weights above safe solo lifting thresholds.