Safety Procedures Flashcards
7 cards from real CWLP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety Procedures flashcards as text
What is the required frequency for powered industrial truck operator re-evaluation under OSHA standards?
Answer: Whenever the operator is observed operating unsafely, has an accident, or encounters a new type of truck
OSHA 29 CFR 1910.178(l) requires re-evaluation when unsafe operation is observed, after an accident, or when a new truck type is introduced.
In a warehouse emergency evacuation, what is the purpose of a designated 'muster point'?
Answer: A pre-designated assembly area where all personnel are accounted for after evacuation
Muster points are pre-identified assembly areas outside the building where headcounts are taken to confirm all employees have safely evacuated.
Which OSHA regulation covers Hazard Communication (HazCom) and the Right-to-Know standard?
Answer: 29 CFR 1910.1200
OSHA's Hazard Communication Standard (HCS) is codified at 29 CFR 1910.1200 and ensures employees have the right to know about chemical hazards in their workplace.
A warehouse worker notices condensation forming on the floor near the freezer dock transition area. What is the PRIMARY safety concern?
Answer: Slip and fall hazard from the wet surface
Condensation on floors creates slip hazards that can cause serious injuries, and must be addressed with drainage, anti-slip mats, or drainage channels.
What does the term 'safe working load' (SWL) mean when marked on warehouse lifting equipment?
Answer: The maximum load the equipment is designed to lift safely under normal conditions
SWL is the maximum load that equipment can handle safely — it already incorporates a safety factor and must never be exceeded.
When conducting a pre-shift forklift inspection, a driver finds the load backrest extension is cracked. What is the correct action?
Answer: Remove the forklift from service and report the defect before using it
A cracked load backrest is a structural safety defect — the forklift must be removed from service immediately and not used until repaired.
Which practice BEST prevents pedestrian-forklift collisions in a busy warehouse environment?
Answer: Implementing physical barriers, designated pedestrian lanes, and intersection warning systems
Engineering controls like physical barriers and separated pedestrian lanes are far more effective than relying solely on PPE or behavioral controls.