Safety Procedures Flashcards

What is the primary purpose of a Safety Data Sheet (SDS) in a warehouse environment?

Answer: To provide hazard and safe handling information for chemicals

SDS documents provide critical information about chemical hazards, safe handling, storage requirements, and emergency response procedures.

When a warehouse worker discovers a chemical spill, what should be the FIRST action taken?

Answer: Notify the supervisor and evacuate the area if needed

The first priority is to notify the supervisor and evacuate if necessary, then consult the SDS before any cleanup begins.

Which OSHA standard specifically governs powered industrial trucks (forklifts) in the workplace?

Answer: 29 CFR 1910.178

OSHA 29 CFR 1910.178 covers powered industrial trucks, including forklifts, pallet jacks, and other industrial vehicles.

What does the term 'lockout/tagout' (LOTO) procedure protect workers from?

Answer: Unexpected energization or startup of machinery during maintenance

LOTO procedures isolate energy sources to prevent machinery from unexpectedly energizing or moving during maintenance or servicing.

A warehouse aisle is marked with yellow floor tape. What does this typically indicate?

Answer: A pedestrian walkway or traffic lane boundary

Yellow floor markings typically designate traffic lanes, pedestrian walkways, or boundaries between work and travel areas.

What is the maximum safe load capacity rule when a forklift nameplate specifies 5,000 lbs?

Answer: The forklift must never carry more than 5,000 lbs under any circumstance

The rated capacity on the nameplate is the absolute maximum — exceeding it risks tip-overs and structural failure.

Which type of fire extinguisher is appropriate for a Class B fire involving flammable liquids in a warehouse?

Answer: CO2 or dry chemical extinguisher rated for Class B

Class B fires involve flammable liquids and gases, and require CO2 or dry chemical extinguishers — never water, which can spread the fire.