CWI Facility Management & Operations Flashcards
6 cards from real CWI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 CWI Facility Management & Operations flashcards as text
What is the recommended minimum frequency for rotating or resetting bouldering and top-rope routes in a commercial climbing gym to maintain member engagement?
Answer: Every 4–8 weeks depending on traffic volume and member feedback
Most commercial facilities rotate routes every 4–8 weeks to keep the experience fresh for regular members and prevent routes from becoming overly polished or outdated.
A climber reports that a hold on a top-rope wall feels 'greasy' and spins slightly. What is the correct staff response?
Answer: Immediately pull the route from service, tighten or replace the hold, and verify the T-nut before reopening
A spinning hold is a safety hazard that could detach under load; the route must be closed and the hold secured before allowing further climbing.
When planning the layout of a new climbing facility, what is the primary safety consideration for spacing between bouldering problems?
Answer: Providing adequate clearance to prevent climbers on adjacent problems from colliding mid-fall
Adequate spacing between bouldering problems is critical to prevent climbers falling from one problem from landing on or colliding with a climber on an adjacent problem.
Under OSHA regulations, what is required when a climbing gym employee is working on elevated sections of a wall (e.g., during route setting above 4 feet)?
Answer: Fall protection systems such as a harness and belay, or a safety net, must be in use
OSHA General Industry standards require fall protection when working at heights above 4 feet, meaning route setters must use appropriate harness and belay systems or equivalent fall protection.
Which of the following is the BEST practice for managing chalk buildup on climbing wall holds and panels?
Answer: Regularly brush holds with a stiff bristle brush and use compressed air to clean T-nut holes
Regular brushing with stiff bristle brushes removes chalk from holds while compressed air clears T-nut holes, preventing hardware corrosion and maintaining consistent friction properties.
What should a CWI do when a participant's medical history form indicates a recent shoulder surgery?
Answer: Consult with the participant and their physician's clearance, modify the program to avoid contraindicated movements, and monitor closely
A recent shoulder surgery requires physician clearance, an individualized program modification avoiding contraindicated overhead loading, and close monitoring during sessions.