Practice Test GeeksCWI Practice Test
← All CWI Flashcard Decks

Codebook Navigation and Application Flashcards

7 cards from real CWI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Codebook Navigation and Application flashcards as text

  1. A CWI is inspecting a cyclically loaded structure and needs to apply the correct RT acceptance criteria. Compared to statically loaded criteria in AWS D1.1, the cyclic criteria are generally:

    Answer: More stringent for planar discontinuities

    Cyclic (fatigue) loading makes structures more sensitive to planar discontinuities like cracks and lack of fusion, so AWS D1.1 applies stricter acceptance criteria for these defect types.

  2. AWS D1.1 uses the term 'Engineer' with a capital 'E' throughout the code. This specifically refers to:

    Answer: The Engineer of Record responsible for the design

    AWS D1.1 defines 'Engineer' (capitalized) as the Engineer of Record — the individual or organization responsible for the structural design.

  3. Which AWS D1.1 provision allows the Contractor to use an alternative to a code requirement if equivalency can be demonstrated to the Engineer's satisfaction?

    Answer: The general provisions allowing Engineer approval of alternatives

    AWS D1.1 contains general provisions that allow the Engineer to approve alternatives to specific code requirements when the Contractor demonstrates technical equivalency.

  4. In AWS D1.1, a 'T, K, or Y connection' is referenced in tubular provisions. What geometric feature defines these connection types?

    Answer: The angle at which one tubular member intersects another

    T, K, and Y designations describe the geometry of tubular member intersections — T is approximately 90°, Y is at an acute angle, and K involves two branch members.

  5. When navigating AWS D1.1 for a piping application, a CWI should be aware that:

    Answer: Pressure piping is excluded from AWS D1.1 scope and governed by ASME B31 codes

    AWS D1.1 scope explicitly excludes pressure piping, which is governed by ASME B31 series codes; applying D1.1 to pressure piping would be a code misapplication.

  6. A footnote in AWS D1.1 Table 6.1 is marked with a double dagger (‡). How does a CWI locate the corresponding footnote text?

    Answer: Immediately below the table body

    In AWS D1.1, table footnotes appear directly below the table body, identified by matching symbols (*, †, ‡, etc.) or superscript letters.

  7. When AWS D1.1 specifies that a WPS must be 'qualified in accordance with Section 5,' the Contractor's obligation is to:

    Answer: Test weld test assemblies per Section 5 and document results on a PQR

    Section 5 qualification requires the contractor to produce test weld assemblies, test them per specified procedures, and record results on a Procedure Qualification Record (PQR).